Publikationen Keramische Werkstoffe/Hochleistungskeramik

Pang, Shumin; Wu, Dongwei; Gurlo, Aleksander; Kurreck, Jens; Hanaor, Dorian A. H.
Additive manufacturing and performance of bioceramic scaffolds with different hollow strut geometries
Biofabrication, 15 (2)
2023

DOI

10.1088/1758-5090/acb387

Ovsianytskyi, Oleksandr
Fabrication and characterisation of the graphene-based gas sensors
PhD Thesis
PhD Thesis
Technische Universität Berlin

Deinhofer, Joachim
Additive Fertigung von Al203- und SiC-Keramiken mittels Layerwise Slurry Deposition: Additive Manufacturing of Al2O3 Ceramics by Layerwise Slurry Deposition
Masterarbeit
Masterarbeit
Technische Universität Berlin

Pelk, Moritz
Additive Fertigung von marsanalogen Gesteinen: Additive manufacturing of Mars simulant
Masterarbeit
Masterarbeit
Technische Universität Berlin

Molin, Emiliano Dal
Additive Manufacturing 3D printing of chemo- and biocatalysts with control over spatial composition
PhD Thesis
PhD Thesis
Technische Universität Berlin

Kang, Minkyu
Additive manufacturing of electronics, sensors and actuators
PhD Thesis
PhD Thesis
Technische Universität Berlin

Pang, Shumin
Additive manufacturing of polycrystalline silicate bioceramics
PhD Thesis
PhD Thesis
Technische Universität Berlin

Chen, Yong-Cin
Additive Manufacturing of Polymer / Ceramic Composites as MM Wave Dielectrics
Masterarbeit
Masterarbeit
Technische Universität Berlin

Kober, Delf
Alterungsprozesse in Lithium-Ionen-Batterien: Aging processes in Li-ion batteries
PhD Thesis
PhD Thesis
Technische Universität Berlin

Yang, Inhyuk
Aufbau, Testung und Optimierung einer Li-Ionen-Batteriezelle für die in-situ-Charakterisierung mit der Positronenannihilationsspektrospie
Advanced Laboratory Research
Advanced Laboratory Research
Technische Universität Berlin

Abdullayev, Amanmyrat
Ceramic membranes for water purification
PhD Thesis
PhD Thesis
Technische Universität Berlin

Salah, Mohamed
Data Science and Machine Learning-guided Exploration of Novel Materials
Advanced Laboratory Research
Advanced Laboratory Research
Technische Universität Berlin

Avcioglu, Celal
Development and characterization of Inorganic Nanomaterials for Energy-Related Applications
PhD Thesis
PhD Thesis
Technische Universität Berlin

Guo, Wuqi
Electrode materials for post-lithium-ion batteries
PhD Thesis
PhD Thesis
Technische Universität Berlin

Lukas, Jonas
Entwicklung hochporöser keramischer Filterschäume mit einem modifizierten Direktschäumungsverfahren: Development of highly porous ceramics via modified direct foaming techniques
Masterarbeit
Masterarbeit
Technische Universität Berlin

Huaiyou, Chen
Extrusion-based additive manufacturing of biopolymer- and fungal-based materials
Masterarbeit
Masterarbeit
Technische Universität Berlin

Zemke, Fabian
Formation mechanism of silica-based and multicomponent aerogels studied in-situ
PhD Thesis
PhD Thesis
Technische Universität Berlin

Karacasulu, Levent; Karl, David; Gurlo, Aleksander; Vakifahmetoglu, Cekdar
Cold sintering as a promising ISRU technique: A case study of Mars regolith simulant
ICARUS, 389
2023
ISSN: 0019-1035

DOI

10.1016/j.icarus.2022.115270

Zavareh, Sara
Freeze- and tape-casting of LiFePO4 cathodes
PhD Thesis
PhD Thesis
Technische Universität Berlin

Fundamental aspects of performance and stability of multi-metallic catalytic systems in coupled chemocatalytic reactions
PhD Thesis
PhD Thesis
Technische Universität Berlin

Schmelter, Clara
Fungi 3D prints
Advanced Laboratory Research
Advanced Laboratory Research
Technische Universität Berlin

Kaba, Onur
Fused Deposition Modeling of Biocompatible Nanocomposites for Load-Bearing Applications
PhD Thesis
PhD Thesis
Technische Universität Berlin

Lappe, Marc Manuel
H2O weathering of lunar regolith simulants for fusion drying of space structures
Bachelorarbeit
Bachelorarbeit
Technische Universität Berlin

Depping, Marc
Material extrusion of Martian Clay simulants under simulated Mars conditions
Bachelorarbeit
Bachelorarbeit
Technische Universität Berlin

Kamutzki, Franz
Materials for laser-based additive manufacturing
PhD Thesis
PhD Thesis
Technische Universität Berlin